Product Category: IBC Path Marking
The low profile black anodized aluminum has a JALITE AAA Rigid PVC insert for fast charge and long afterglow. The black color and abrasive portion adds contrast enhancing the visibility of the step reducing slips, trips and falls. The 9061 is both glued and screwed to the step, to assure it will stay in place.
Code
Product Number: 9061
1024.2.1 Steps. A solid and continuous stripe shall be applied to the horizontal leading edge of each step and shall extend for the full length of the step. Outlining stripes shall have a minimum horizontal width of 1 inch (25 mm) and a maximum width of 2 inches (51 mm). The leading edge of the stripe shall be placed at a maximum of 1/2 inch (12.7 mm) from the leading edge of the step and the stripe shall overlap the leading edge of the step by not more than 1/2 inch (12.7 mm) down the vertical face of the step.
1024.2.2 Landings. The leading edge of landings shall be marked with a stripe consistent with the dimensional requirements for steps.
Usage
The IBC and IFC Codes require luminous egress path markings on the leading edge of each step. As the only part of your egress path marking system that is walked upon frequently, Jalite has designed several attractive solutions for this critical element of you safety egress system.